Jack connection at startup

Post Reply
JJ-Midday
F5 - Eucalyptus
Posts: 7
Joined: Thu Sep 17, 2015 9:03 am

Jack connection at startup

Post by JJ-Midday » Fri Mar 04, 2016 8:52 am

Hi all! I'm using jack audio kit and giada on Centos7, if i start giada it connects output to client "system" instead of the one set on "Config" dialog. My connections on jack are working, only when i start giada i get the ones i want to and the connection to "system" (which is the standard output) that i do not want to (because i pass it to a specific channel which i called "GIADA MON" where i set the volume avoiding my hear to break up). I tried to change the settings on "Config" but at restart it doesn't change nothing. Any suggestions?

User avatar
FFT
F14 - Syrian Rue
Posts: 512
Joined: Thu Mar 08, 2012 6:51 pm

Re: Jack connection at startup

Post by FFT » Sun Mar 13, 2016 4:21 pm

Hi JJ-Midday,

Sorry for the delay, we were busy with the new 0.12.0 release. Unfortunately I'm not the most skilled Jack user, I don't know if I can help here. Let's start with a simple question: how many output devices you see in the "config" tab, once the Jack system has been selected (and Giada restared)?

Post Reply