Giada config error with Orange OMEC Teleport

[utensil]

Hi all,
I'm trying to use Giada with my Orange OMEC Teleport interface, but I get no input.
-- Giada Version 0.16.1 (1.0)
-- OS X Version 10.13.6

When I quit/restart I get 'your soundcard isn't configured correctly'.

I believe the input should be the BurrBrown USB, but it shows no input channels (see image below)
Note that the device shows up twice in the log (3,4) but only once in the interface, with only outputs.
Log reads:

[init] MIDI map read failed!
[KA] using system 0x10
[KA] Opening devices 1 (out), 3 (in), f=44100...
[KA] 8 device(s) found
0) Apple Inc.: Built-in Microphone
1) Apple Inc.: Built-in Output
2) Apple Inc.: Display Audio
3) BurrBrown from Texas Instruments: USB AUDIO CODEC
4) BurrBrown from Texas Instruments: USB AUDIO CODEC
5) ma++ ingalls for Cycling '74: Soundflower (2ch)
6) ma++ ingalls for Cycling '74: Soundflower (64ch)
7) zoom.us: ZoomAudioDevice
[KA] rtSystem init error: RtApiCore::probeDeviceOpen: the device (3) does not support the requested channel count.
[mixer::init] buffers ready - framesInSeq=88200, framesInBuffer=32
[KM] using system 0x1
[KM] 0 output MIDI ports found
[KM] 0 input MIDI ports found
[init] All subwindows and UI thread closed
[init] configuration saved
[init] PluginHost cleaned up
[init] Giada 0.16.1 closed

Can anyone help?
thanks!

[FFT]

HI utensil (great nick btw),

Could you please try again with Giada 0.16.2, i.e. the latest version? Many things have changed in the audio library from version 0.16.1 to 0.16.2. Thanks!