[FIXED] Windows 7 Giada crashes when BPM is set below the default 120

Errors, malfunctions, website typos.
Post Reply
bbolt
F5 - Eucalyptus
Posts: 5
Joined: Tue Sep 12, 2017 7:45 pm

[FIXED] Windows 7 Giada crashes when BPM is set below the default 120

Post by bbolt » Tue Sep 12, 2017 9:22 pm

I previously submitted a bug suggesting that Giada crashes on Windows 7 when sampling, and this occurs after saving and reopening a project. After a little more analysis I determined that saving and opening the project has nothing to do with the crash. Rather the crash is associated with changing the bmp value to something less than 120.

Scenario

Download Giada version 0.14.2.
Unpack Giada.
Run Giada once to setup the audio drivers. (See attached config.)
Close and restart Giada. (Giada does not quit, and has to be killed.)
Restart Giada.
Change the bmp to 90.
Add a new sample.
Turn on direct input monitoring.
Arm the sample.
Record.

Crash.

Other Values Tested
Giada crashes on 60, 90, 100, 115 bpm.
Giada sample OK on 130 and 150 bmp.
Attachments
giada.002.log
(10.61 KiB) Downloaded 340 times
Default Project.JPG
Default Project.JPG (46.74 KiB) Viewed 6123 times

User avatar
FFT
F14 - Syrian Rue
Posts: 515
Joined: Thu Mar 08, 2012 6:51 pm

Re: Windows 7 Giada crashes when BPM is set below the default 120

Post by FFT » Thu Sep 14, 2017 8:18 am

Hi bbolt, thanks for reporting: I can confirm the crash on Windows 7. We are looking into this, will keep you posted on the progress.

User avatar
vision
F10 - Milk thistle
Posts: 83
Joined: Fri Mar 29, 2013 10:56 am

Re: Windows 7 Giada crashes when BPM is set below the default 120

Post by vision » Sat Sep 16, 2017 6:23 am

Confirmed on Linux too with the current dev version (0.14.3).

User avatar
FFT
F14 - Syrian Rue
Posts: 515
Joined: Thu Mar 08, 2012 6:51 pm

Re: Windows 7 Giada crashes when BPM is set below the default 120

Post by FFT » Sat Sep 16, 2017 6:38 am

Fixed in development version. Giada 0.14.3 will be released soon, hold on! ;)

User avatar
FFT
F14 - Syrian Rue
Posts: 515
Joined: Thu Mar 08, 2012 6:51 pm

Re: Windows 7 Giada crashes when BPM is set below the default 120

Post by FFT » Thu Sep 21, 2017 7:08 am

Fixed in 0.14.3. Feedback is welcome.

guen
F3 - Chamomille
Posts: 2
Joined: Tue Oct 24, 2017 3:36 pm

Re: [FIXED] Windows 7 Giada crashes when BPM is set below the default 120

Post by guen » Tue Oct 24, 2017 4:06 pm

Hello,
I have just installed giada the first time Version 0.14.3.
Its really a lovely Program and I just created a beat in a minute. I am stoked! I want to use it! So I will report Bugs ;)

As there is no export function for the sequenced loops i've tried to cheat and connected the giada out to the giada input via jackd.
It seems that the recording starts but the Moment the Metronom/Counter hits the sixth count giada is crashing.
My Projekt is set to 131BPM 8/1.
I am on windows8
I just have tried it with recording from mic without jackd
On Asio4All recording runs the whole bar but crashes when I press stop or disable the recording.
On FL Studio ASIO its the same behavior as on JACKD.

I hope it's right to report in this thread rather than create a new one...the problem is similar.

cheers Guen

User avatar
FFT
F14 - Syrian Rue
Posts: 515
Joined: Thu Mar 08, 2012 6:51 pm

Re: [FIXED] Windows 7 Giada crashes when BPM is set below the default 120

Post by FFT » Wed Oct 25, 2017 9:51 am

guen wrote:Hello,
I have just installed giada the first time Version 0.14.3.
Its really a lovely Program and I just created a beat in a minute. I am stoked! I want to use it! So I will report Bugs ;)
Hi guen, thanks for your love! Two questions:

Does Giada keep crashing with the default BPM/Beats values (120.0 BPM, 4/4 beats)?.

What happens if you select a different audio API instead of Asio4All (on Windows you should be able to choose between DS and WASAPI)?

guen
F3 - Chamomille
Posts: 2
Joined: Tue Oct 24, 2017 3:36 pm

Re: [FIXED] Windows 7 Giada crashes when BPM is set below the default 120

Post by guen » Wed Oct 25, 2017 4:59 pm

Oh man,
i am really sorry, i guess jackd messed up my System...
just noticed that mixxx won't start at all with jackd installed.

I removed jackd restarted the maschine and now recording is working with asio4all... also in my saved Project regardless of tempo and measures.

On DS and WASAPI I have no inputs available...
on FL Studio Asio I could maybe record now but there is no signal on the mic

But all this is not related to giada... Windows is no fun for audio...

I have recorded my loops on my trusty SP, so i've made my first track with giada :D

My apologies again!
Guen

User avatar
FFT
F14 - Syrian Rue
Posts: 515
Joined: Thu Mar 08, 2012 6:51 pm

Re: [FIXED] Windows 7 Giada crashes when BPM is set below the default 120

Post by FFT » Fri Oct 27, 2017 9:02 am

Don't worry, a double check on our side is always a good thing. ;) Have fun!

Post Reply